24 Port 10/100Mbps Layer 2 Switch

• Tweet

TEG-S2600i | 24-Port 10/100Mbps Layer 2 Switch with 1x Gigabit RJ-45 port and 1x Gigabit Mini-GBIC slot - TRENDnet Networking Products

	Average ETA for Additional Units	Contact Us
	Product Datasheet	Download

The TEG-S2600i 26 Port Stackable SNMP switch provides foundation for a highly scalable and easily managed network. The Web/SNMP Managed Switch allows network administrators to remotely monitor and manage network performance and security.

Network administrators can stack up to 16 switches and manage them with a single IP address. The TEG-S2600i can be incorporated into high-speed backbone connectivity through Gigabit ports or mini-GBIC ports. Security and performance are optimized with advanced features including Port/Tag-based VLAN, QoS, and Trunking.

• Stackable up to 16 Switches with Gigabit Ports
  • Single IP function supports up to 32 Switches
  • Single IP management with stackable mode (Gigabit ports only)
  • Single IP management with agent mode (Any port on the switch)
• Manage all Uplink or Stacked Switches Locally or Remotely with a Single IP Address
  • Public IP required when managing remotely; Port 80/28019 need to be opened when running behind a Firewall/Router
• 24 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet Ports
• 2 Pairs of 10/100/1000mbps Gigabit Copper Port and Mini-GBIC Slot (1 Copper + 1 Mini-GBIC slot per pair)
• Built-in 3Mb Packet Buffer and 1Mb Control Buffer
• Provides 6K MAC, 4K VLAN and 2K Multicast Entries
• Supports 255 Entries of Static MAC and Port Based MAC Table Display
• Supports 802.3x Flow Control for Both Half/Full Duplex Operation
• Supports Head-of-Line Blocking Prevention
• Supports Broadcast Storm Filtering
• Supports Port-Based VLAN (256 Groups), IEEE 802.1q Tag-Based VLAN (PVID 1~255)
• Supports 802.1Q Protocol-Based VLAN Classification
• Supports 802.1x Authentication and Authorization
• Supports IP Multicast, IGMP Snooping and 802.1D Spanning Tree
• Supports 2-Level Priority Queuing
• Supports Port Trunking with Flexible Load Distribution Control and Fail-Over Functions
  • Max 7 Trunk groups with 4 ports per group
• Supports Ingress Port Security Mode and By-Port Egress/Ingress Rate Control
• Supports Source-Port-Based, Destination-Port-Based, and Source-Destination-Pair-Based Sniffer Function
• Supports RMON Group 1, 2, 3, 9 and PING Function from the Switch
• Store-and-Forward Switching Architecture with Non-Blocking Wire-Speed Performance
• Configuration via Console Port (serial cable included), SNMP (v1.0, MIB II), TELNET, and Web Browser
• Upgradeable Firmware via Browser or TFTP Program
• Standard 19” (1U) Rack Mount Size (kit included)